3D-printable EDF nacelle for VQ Models Hornet SubSonex (+ other accessories)
Source: Cults3D by tahustvedt
The 3D-printable EDF nacelle for VQ Models Hornet SubSonex (+ other accessories) is a free printable 3D model from Cults3D by tahustvedt. I designed this nacelle for my VQ Models Hornet to eliminate the terrible pitching it has with throttle. You can download the STL file from the original listing below and print it at home.
About this model
I designed this nacelle for my VQ Models Hornet to eliminate the terrible pitching it has with throttle. The original thrust line causes the plane to drope the nose sharply when throttle is increased, and vice versa. This nacelle points the efflux up (effectively down thrust) which compensates for the high thrust line and makes the plane fly great. Here's a flight video with this nacelle and motor: It's designed to use this motor with a 4S battery: It will draw 95 A with a 4S battery on full throttle, and will cruise the plane fine on half thtottle. It does not overheat. I use a 4S 4000 mAh lipo. Use short pieces of 4 mm rod to join the EDF housing together. The exhaust piece must point upwards, off course. Print Fanhousing01 from ASA, ABS or PETG or other heat resistant material to preven…
Frequently asked questions
- Is this 3D model free to download?
- Yes. 3D-printable EDF nacelle for VQ Models Hornet SubSonex (+ other accessories) is free to download from Cults3D. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Cults3D, not by Thinger. We link you directly to the original listing by tahustvedt.
- Who made this model?
- Designed by tahustvedt, published on Cults3D. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in mm
/https://fbi.cults3d.com/uploaders/45174863/illustration-file/305298f4-f68e-4619-aa18-41b7ac1d2ee5/cats.jpg)
