1/4" Foamboard Drawer Divider Connectors
Source: Thingiverse by stonehippo
The 1/4" Foamboard Drawer Divider Connectors is a free printable 3D model from Thingiverse by stonehippo. A while ago, I made a really quick and dirty draw divider using hot glue and 1/4 inch thickness foamboard. You can download the STL file from the original listing below and print it at home.
About this model
A while ago, I made a really quick and dirty draw divider using hot glue and 1/4 inch thickness foamboard. After a couple of years of use, that system gave out (it really was hacked together), so I needed a new solution. This time, I've put together this really simple clip-on connector system. This will let me adjust the dividers as needed, or break it all down and rearrange as needed. The clips are designed to be a little snug, with a 4.75mm channel that hugs the foamboard nicely. The design time I put into the Fusion 360 side was probably 15 minutes for all three of the components (cross-connector, t-connecter, and end cap). I may go back in and create a parameterized version of these so they can be sized to different material widths and depths.
Frequently asked questions
- Is this 3D model free to download?
- Yes. 1/4" Foamboard Drawer Divider Connectors is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by stonehippo.
- Who made this model?
- Designed by stonehippo, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
