MINI CNC with cdrom steppers
Source: Thingiverse by tibuck
The MINI CNC with cdrom steppers is a free printable 3D model from Thingiverse by tibuck. Still VERY VERY much a work in progress I uploaded only so you can bring your ideas to the project, The idea is to use heavy fishing line as belts and use pulley's system to help. You can download the STL file from the original listing below and print it at home.
About this model
Still VERY VERY much a work in progress I uploaded only so you can bring your ideas to the project, The idea is to use heavy fishing line as belts and use pulley's system to help double the strength of weak of the cd-rom motors. I have created a grope for us to communicate and calibrate Rods I used are 7mm aluminum bar stock, which is easily found in any metal supplier shop, the threaded rods are 3/16 inch. the build plate should be a 1/8 acrylic sheet and the idea was to use double side tape to stick to the printed bearings and Y carriage block which I have not designed yet. also the X carriage will be a two part so it could easily be swapped for a pen or a laser or a small drill with servo.
Frequently asked questions
- Is this 3D model free to download?
- Yes. MINI CNC with cdrom steppers is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by tibuck.
- Who made this model?
- Designed by tibuck, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in MINI
