Is this 3D model free to download?

Yes, 鱼儿漂流喂食器 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by user_684109950, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

鱼儿漂流喂食器 3D printable model by user_684109950

鱼儿漂流喂食器

Source: MakerWorld by user_684109950

The 鱼儿漂流喂食器 is a free printable 3D model from MakerWorld by user_684109950. 为我助力来几张快过期的助力券把~~~谢谢~小花！水下仿生喂食，观赏鱼沉浸式追食体验。告别繁琐的喂食模式切换，无需担心喂食后忘记开启过滤；有效防止水泵启动瞬间，未吃完的饵料被吸入过滤系统，降低水体污染风险，守护鱼缸水质稳定。温馨提示：本产品仅支持沉底饲料。88VIP每天两元无门槛，等于不要钱【淘宝】 CZ007 「奶嘴瓶宽标口液态硅胶喂奶奶嘴. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

30 saves Source: MakerWorld Updated 2026-10-15 Print time: 6h 38m Filament: 207 g License: SDFL · non-commercial Category: Vehicles & RC

Tags: 鱼, 鱼缸, 金鱼, 兰寿, 喂食, 喂食器, 悬浮

About this model

为我助力来几张快过期的助力券把~~~谢谢~小花！水下仿生喂食，观赏鱼沉浸式追食体验。告别繁琐的喂食模式切换，无需担心喂食后忘记开启过滤；有效防止水泵启动瞬间，未吃完的饵料被吸入过滤系统，降低水体污染风险，守护鱼缸水质稳定。温馨提示：本产品仅支持沉底饲料。88VIP每天两元无门槛，等于不要钱【淘宝】 CZ007 「奶嘴瓶宽标口液态硅胶喂奶奶嘴宝宝婴儿」点击链接直接打开或者淘宝搜索直接打开奶嘴到手后，请把奶嘴稍微开大一点点，不要一下子剪太多，宁愿多试几次口子慢慢开大。为我助力来几张快过期的助力券把~~~谢谢~小花！

Frequently asked questions

Is this 3D model free to download?: Yes. 鱼儿漂流喂食器 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by user_684109950.
Who made this model?: Designed by user_684109950, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.