Archix 230 Drone Frame
Source: Thingiverse by AntsAare
The Archix 230 Drone Frame is a free printable 3D model from Thingiverse by AntsAare. This is my custom-made fpv drone frame. You can download the STL file from the original listing below and print it at home.
About this model
This is my custom-made fpv drone frame. To build this yourself you need to print the arms model twice normal and twice fliped in the y axis. then you need to print the top and bottom halves, aswell as the arm connectors (twice). Then you need to assemble it: Use M3 screws and nuts aswell as M3 spacers. The Parts I used are the following: Camera: 600TVL 2.8mm Lens - Motors: Racerstar 2306 2400kv - VTX: Eachine tx526 - FC, ESC and PDB (with OSD): Starf4S - Antennas: Realac Pagoda - Batterys: AHTECH Infinity 1300mah 14.8V - Capacitor: 35V 1000uF Electrolytic Capacitor -
Frequently asked questions
- Is this 3D model free to download?
- Yes. Archix 230 Drone Frame is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by AntsAare.
- Who made this model?
- Designed by AntsAare, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Archix
