CR-10 Dual V6 Extruder Update 1.1
Source: Thingiverse by jaimefriasjr
The CR-10 Dual V6 Extruder Update 1.1 is a free printable 3D model from Thingiverse by jaimefriasjr. Update 5/08/2018: I add it a go pro mount to the fans. You can download the STL file from the original listing below and print it at home.
About this model
Update 5/08/2018: I add it a go pro mount to the fans. The reason I made this is not meant for recording, but as a more precise way to check if the printer is printing correctly. Now I am able to see the tip and see if the nozzle is printing and a camera from far away will tell me a few hours later when there's a gap or a problem. Note: This part can be used for anything that you want, you can make your own part for this section. Update 4/09/18: I made some changes to the extruder, I made the hotends a little closer (22.79 mm to be exact, make sure you change the firmware setting) and I move the tool 0 to the original location as the CR-10. This way you have one nozzle that is able to reach each end of the bed, now you will not have to worry about leaving some space around the edge. Update…
Frequently asked questions
- Is this 3D model free to download?
- Yes. CR-10 Dual V6 Extruder Update 1.1 is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by jaimefriasjr.
- Who made this model?
- Designed by jaimefriasjr, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in CR-10
