Is this 3D model free to download?

Yes, 60v23安电动车锂电池盒，适用于替换电动车铅酸电池 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by user_3423619542, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

60v23安电动车锂电池盒，适用于替换电动车铅酸电池 3D printable model by user_3423619542

60v23安电动车锂电池盒，适用于替换电动车铅酸电池

Source: MakerWorld by user_3423619542

The 60v23安电动车锂电池盒，适用于替换电动车铅酸电池 is a free printable 3D model from MakerWorld by user_3423619542. 60v23安的电动车锂电池盒，适用于PDD购买的国轩23安磷酸铁锂电芯，建议购买20块组成60V电池组，用于替换普通电动车铅酸电池。电芯购买成本约400元左右（请注意一定选择转镍过的电芯，否则无法焊接），保护板约80元，自行焊接组装。模型尺寸刚好能放下20块组装好的电池组，请在盖子接缝处打上704防水硅胶。这样一块足以替换老化铅酸电池的锂电池就做好了。记得更. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

30 saves Source: MakerWorld Updated 2026-10-29 Print time: 11h 16m Filament: 443 g License: CC-BY · commercial OK 2 makes Category: Gadgets & Electronics

Tags: 锂电池盒, 电动车, 铅酸电池

About this model

60v23安的电动车锂电池盒，适用于PDD购买的国轩23安磷酸铁锂电芯，建议购买20块组成60V电池组，用于替换普通电动车铅酸电池。电芯购买成本约400元左右（请注意一定选择转镍过的电芯，否则无法焊接），保护板约80元，自行焊接组装。模型尺寸刚好能放下20块组装好的电池组，请在盖子接缝处打上704防水硅胶。这样一块足以替换老化铅酸电池的锂电池就做好了。记得更换锂电池专用充电器（20串配最高73V的充电器），禁止用铅酸充电器对锂电池充电。如果是极空保护板，还可以手机连接蓝牙实时关注电芯均衡情况，有利于大大延长锂电池寿命。

Frequently asked questions

Is this 3D model free to download?: Yes. 60v23安电动车锂电池盒，适用于替换电动车铅酸电池 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by user_3423619542.
Who made this model?: Designed by user_3423619542, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.