C64/128 1541-SD case DIY
Source: Thingiverse by StmLord
The C64/128 1541-SD case DIY is a free printable 3D model from Thingiverse by StmLord. This is a case for a DYI SD2IEC for Commodore 8-bit computers. You can download the STL file from the original listing below and print it at home.
About this model
This is a case for a DYI SD2IEC for Commodore 8-bit computers. You can find the schematics for the circuit at SOLO761 blog : It consists of 4 parts, front and base must be glued together, it is easier to glue them after you have assembled the front with leds and switches The C= logo is separate, so the top case cover can be printed upside down for better upside finish and can be glued at a later stage There are 2 different fronts, one is the regular and another with a widened slot hole incase your PCB is thicker and you can not slide together with sd-slot into the opening slot. The PCB will be screwed to the base with 3 screws, the holes on the PCB is calculated to be on space without vias, you will have to align the PCB to base and mark where the holes must be drilled on the PCB. The hole…
Frequently asked questions
- Is this 3D model free to download?
- Yes. C64/128 1541-SD case DIY is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by StmLord.
- Who made this model?
- Designed by StmLord, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in C64/128
