Swimbait fishing Lure 12.5cm (easy print and build)
Source: Thingiverse by Domi1988
The Swimbait fishing Lure 12.5cm (easy print and build) is a free printable 3D model from Thingiverse by Domi1988. Easy to print and assembly Swimbait! 100% working! No epoxy needed! I worked really long on this lure, so please leave a like and a make!!! UPDATE 05.08.2018 (for information. You can download the STL file from the original listing below and print it at home.
About this model
Easy to print and assembly Swimbait! 100% working! No epoxy needed! I worked really long on this lure, so please leave a like and a make!!! UPDATE 05.08.2018 (for information scroll all the way down.) There are 4 different Heads and 2 different Mid parts. Look on the first picture and you will figure it out ;) I also designed Line Thru Head versions. You find them under remix. If you want a swimbait without lip, use the head from my glide bait. it works! For assembly instructions scroll down. Print settings: 100% infill 2 outer walls 0.1 - 0.2mm layer height no support (only for Fin) no top and bottom layers (only important for S3D users) Print orientation like on pic 2!!! I allways drop one pellet of silica gel with tweezers into every air chamber while printing. So i have a rattle sound …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Swimbait fishing Lure 12.5cm (easy print and build) is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Domi1988.
- Who made this model?
- Designed by Domi1988, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
