WiFi controlled power strip
Source: Thingiverse by craigj
The WiFi controlled power strip is a free printable 3D model from Thingiverse by craigj. 3D printed case, a Sonoff WiFi switch, old outlets & an some old extension cords. You can download the STL file from the original listing below and print it at home.
About this model
3D printed case, a Sonoff WiFi switch, old outlets & an some old extension cords. Cost for each strip was under $10 Control the unit with Sonoff's mobile app, an Alexa, or the onboard switch. WARNING: This project involves voltages which can cause injury or even death. You should not attempt this project If you are not experienced in working with household A/C voltage. WARNING:DO NOT use a 3 prong outlet if you are not going to use a 3 prong plug (and wire the 3rd/ground plug). To do so would be circumventing a safety feature and could result in injury or even death. NOTICE: The Sonoff module is rated for 10 Amps I use 2-wire outlets in these so that higher load appliances/tools cannot be plugged In I desolder the green connection blocks from the Sonoff and toss them away I solder all of t…
Frequently asked questions
- Is this 3D model free to download?
- Yes. WiFi controlled power strip is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by craigj.
- Who made this model?
- Designed by craigj, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in WiFi
