Monitor Stand
Source: Thingiverse by NemoKeine
The Monitor Stand is a free printable 3D model from Thingiverse by NemoKeine. Legs for a monitor stand (or any kind of short table) that utilize a standard 3/4" boards or plywood as the horizontal surface. You can download the STL file from the original listing below and print it at home.
About this model
Legs for a monitor stand (or any kind of short table) that utilize a standard 3/4" boards or plywood as the horizontal surface. There are two mirrored corners and one symmetrical leg which can be used in the middle if you need some extra support or don't want to have the legs right on the corners. Each leg has holes for mounting with a #6 wood screw, I recommend using ones ~5/8" or else you will risk running them into each other or breaking through the top surface of the wood. Legs provide 2.7 in (68.58 mm) of clearance for your keyboard or whatever you might wanna store underneath. Update: Included a set of shorter legs for when less height is needed, should give 1.7 in (43.2 mm) of clearance under the wood as well as a set of taller legs when you need more height, should give 2.7 in (68.…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Monitor Stand is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by NemoKeine.
- Who made this model?
- Designed by NemoKeine, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Monitor
