Sand Blaster Gun
Source: Thingiverse by SrKraken
The Sand Blaster Gun is a free printable 3D model from Thingiverse by SrKraken. This sand blaster gun was made with things that I had all ready around in my tool boxes. You can download the STL file from the original listing below and print it at home.
About this model
This sand blaster gun was made with things that I had all ready around in my tool boxes. The pipe is stainless steel with a OD of 0.250". The over all length of the pipe is 3.5". The screws and nuts are 0.250". The air gun is just a standard one with a fitting for the 0.25" pipe. In the base of the deposit the hole inside was made 2 mm in diameter, but at the end I have to use a 5/32" drill to open up the hole in the plastic and in the stainless steel pipe. This way it worked better and I was able to raise the compressor pressure to 30 PSI. DISCLAIMER (WARNING) (ADVERTENCIA): YOU SHOULD TEST THIS USING A LOW PRESSURE AND MOVE UP LITTLE BY LITTLE PRESSURE INCREMENTS. DO NOT USE FULL PRESSURE. USE THIS DESIGN AT YOUR OWN RISK. IT IS NOT A TOY. IT COULD EXPLODE AND HURT YOU OR EVEN KILL YOU. …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Sand Blaster Gun is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by SrKraken.
- Who made this model?
- Designed by SrKraken, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
