Cyclone
Source: Thingiverse by LiViS
The Cyclone is a free printable 3D model from Thingiverse by LiViS. This is a small cyclone project for working with my machines from PROXXON. You can download the STL file from the original listing below and print it at home.
About this model
This is a small cyclone project for working with my machines from PROXXON. He will try to separate the shavings in order not to hammer down the filters of my vacuum cleaner. I had to divide the model into 3 parts to fit in my printer. The principle of operation is evident from the figure. All parts are glued together. On the bottom there are holes for thread M6. The cyclone is mounted on the lid of the bucket, where most of the shavings will be collected. The connecting dimension is 50 mm. add I added a cylindrical spacer of 50 mm. and a confuser with an angle of 20 ° and a large confuser with an angle of 15°. Added confuser height of 199 mm. For those who have a printer working height of 200 mm. The ratio of the height of the cylindrical part to the diameter is strongly influenced by the …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Cyclone is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by LiViS.
- Who made this model?
- Designed by LiViS, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Cyclone
![Cyclone PCB Factory v0.9.7 [added video summary] 3D model](https://cdn.thingiverse.com/renders/55/cb/f4/88/bf/Cyclone_built_v0.9.7_preview_card.jpg)
