Toilet roll holder
Source: Thingiverse by misubisu
The Toilet roll holder is a free printable 3D model from Thingiverse by misubisu. 22/06/2020: I uploaded new stl files as I made a slight modification of the position of the rod holes. You can download the STL file from the original listing below and print it at home.
About this model
22/06/2020: I uploaded new stl files as I made a slight modification of the position of the rod holes. The knobs should swivel freely now. This is an easy load and unload toilet roll holder. you can either stick it to the wall with double sided tape, or use two countersunk screws or toggle bolts. This will hold the double length toilet rolls. The image is a double length roll. When we were able to buy toilet paper again, they only had the double length rolls, but they didn't fit in the old toilet roll holder, so I had to make a new one. This is the result. The rods slide in from the side of the holder that touches the wall and hold the knobs in place, allowing them to pivot up and drop back down again. > I've supplied two rods you can print, or you can use two strips of filament cut to the…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Toilet roll holder is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by misubisu.
- Who made this model?
- Designed by misubisu, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
