The //Pci (2Pci) - a mini-ITX homage to the Apple ||ci
Source: Cults3D by tankgrrl
The The //Pci (2Pci) - a mini-ITX homage to the Apple ||ci is a free printable 3D model from Cults3D by tankgrrl. This is a mini-ITX case designed as an homage to (but not a replica of) the Apple IIci. You can download the STL file from the original listing below and print it at home.
About this model
This is a mini-ITX case designed as an homage to (but not a replica of) the Apple IIci. Ideally the motherboard sled should have heated inserts in the 4mm holes, but you can also use larger screws. The rear screw holes are 3mm and, again, heated inserts are ideal, but it's up to you how you end up fastening things as screws >3mm will also work. The front bezel friction fits on and can be glued down. It has room for two 2x5x7 rectangular LEDS for power and hard drive activity. Female-to-Female jumper wires like these should work for the LEDs and, with ends cut to solder or screw on, the power button. There is a hole in the rear for a 8mm power button and a 10mm Pico PSU power jack (or vice versa if your Pic PSU has an 8mm jack). You will have to decide where to put your Pico PSU inside the …
Frequently asked questions
- Is this 3D model free to download?
- Yes. The //Pci (2Pci) - a mini-ITX homage to the Apple ||ci is free to download from Cults3D. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Cults3D, not by Thinger. We link you directly to the original listing by tankgrrl.
- Who made this model?
- Designed by tankgrrl, published on Cults3D. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
