Angled Case for .96-inch OLED Display
Source: Thingiverse by RobasaurusRex
The Angled Case for .96-inch OLED Display is a free printable 3D model from Thingiverse by RobasaurusRex. This is a small "angled" case for a .96-inch OLED display. You can download the STL file from the original listing below and print it at home.
About this model
This is a small "angled" case for a .96-inch OLED display. It has two mounting holes for either 3mm or #12 screws and an opening in the back for the wires. There's a wide brim on the bottom to help ensure adhesion to the printing bed. Print the body right-side up with supports and the cover face-down. The cover stays on with a press fit. There are two critical dimensions - the diameter of the pins that hold the PCB and the dimensions of the cover. If your printer is not very well calibrated then the pins might be too big for the PCB holes and the cover fit might be too loose or too tight. This is the first thing I've loaded to Thingiverse and I'm looking for some feedback. So please let me know if you have any problems printing this.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Angled Case for .96-inch OLED Display is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by RobasaurusRex.
- Who made this model?
- Designed by RobasaurusRex, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Angled
