Stream Deck Mount
Source: Thingiverse by F1L7H
The Stream Deck Mount is a free printable 3D model from Thingiverse by F1L7H. >###NOTICE >I am not responsible for your use of this print, make sure it doesnt void your warranty, and make sure you are familiar with your printer. You can download the STL file from the original listing below and print it at home.
About this model
>###NOTICE >I am not responsible for your use of this print, make sure it doesnt void your warranty, and make sure you are familiar with your printer. > >Any prints from me may require you to alter the scaling in your slicer depending on the shrink of the material/printer you are using. > >www.iamfilth.com This is a pretty basic mounting for the Elgato Streamdeck. You may have to play with the orientation of the legs and how you use supports to get it to print properly. I personally used support with an overhang of 75 degrees and printed with the flat connector piece down on the build plate. The main body screws to the legs with an M4 Screw and a matching nut and the screw is about 12 mm long but you could use something longer if you dont have one that sits flush. This mount has a screw ho…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Stream Deck Mount is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by F1L7H.
- Who made this model?
- Designed by F1L7H, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Stream
![Soda Stream Bottle Drip Tray [PET] -update- 3D model](https://cdn.thingiverse.com/assets/2c/b6/5e/2c/c2/card_preview_SodaStreamBottleDripTray.png)
