block and tackle 8 parts
Source: Thingiverse by Zshuman666
The block and tackle 8 parts is a free printable 3D model from Thingiverse by Zshuman666. this is a block and tackle i designed so that i could lift things easily around my shop. You can download the STL file from the original listing below and print it at home.
About this model
this is a block and tackle i designed so that i could lift things easily around my shop. I printed the parts that will be handling the main part of the load at 100 percent infill. Everything else was printed at 50% honeycomb infill. For the complete set up, of 8 parts of line you will need 8 pulley wheels, 7 outer walls, 2 attachment points, 1 outer wall tie off, 1 becket body, and 1 inner becket. if you need more or less, ive attached a link to how to reeve the system. Here is a link on how to load the line into the system. it will be on page If you print this, you assume all responsibility if it fails, and it is not my liability. HARDWARE: 1/8 inch paracord 6 sets of 5/16 x 4 inch bolts, washers, and nuts 8 sets of 608 skate bearings (6 x 22 x 7) 1/8 inch cable clamp 1 3/4 x 1 inch bolt …
Frequently asked questions
- Is this 3D model free to download?
- Yes. block and tackle 8 parts is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Zshuman666.
- Who made this model?
- Designed by Zshuman666, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in block
