CheeseRoller - Ikea Skadis Spool Roller
Source: Thingiverse by sensorback
The CheeseRoller - Ikea Skadis Spool Roller is a free printable 3D model from Thingiverse by sensorback. Quick facts - Uses 4x 608ZZ bearings. You can download the STL file from the original listing below and print it at home.
About this model
Quick facts - Uses 4x 608ZZ bearings. - Designed for common 1 kg spools of 200 mm diameter, slightly larger up to 220 mm or smaller down to 180 mm should work well too. - Short version for 250 g spools of 140mm diameter is also included. - Practically tested with 1,1 kg spools weighing 1,4 kg in total. - The mm sizes are the spool width measured from outside to outside. STLs provided in 5 mm steps and some common spool widths in between. - Easy print, can be printed in stages as it's split in several parts. I want this, shut up and get me there, NOW! - PLA is fine, and I only tested with PLA. - 0.2 mm layer height. - 3 perimeters (1.2 mm wall width for a 0.4 mm nozzle). - 20% infill for all parts, except the hooks and mounts which should be printed with 100% infill. - All parts are oriente…
Frequently asked questions
- Is this 3D model free to download?
- Yes. CheeseRoller - Ikea Skadis Spool Roller is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by sensorback.
- Who made this model?
- Designed by sensorback, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in CheeseRoller
