Raspberry PI 2020 mount (eg CR-10, AM8, Tevo Tarantula, Tevo Tornado)
Source: Thingiverse by FreakErn
The Raspberry PI 2020 mount (eg CR-10, AM8, Tevo Tarantula, Tevo Tornado) is a free printable 3D model from Thingiverse by FreakErn. Because of the fact that i had some problems with the VORON case (no holes or wrong diameter), i took the original case, removed the outside holes for mounting it onto a vesa. You can download the STL file from the original listing below and print it at home.
About this model
Because of the fact that i had some problems with the VORON case (no holes or wrong diameter), i took the original case, removed the outside holes for mounting it onto a vesa mount, added six holes into the bottom part itself and now i am Happy with that design. You can easily use some hammer nuts like i showed in one picture and mount the PI where every you want it on your printer. Parts you'll need: 2-3 x hammer nuts (on my cr-10 i used M4) 2-3 x screws fitting into your hammer nuts 4 x M2.5x6 for mounting the pi on the bottom part 4 x M3x20 for mounting the top part to the bottom part Do not use washers inside the case for mounting the case to the 2020 extrusions, you could damage your PI if you short some connections. I powered the PI by using Pin 2 and 6 of the GPIO's.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Raspberry PI 2020 mount (eg CR-10, AM8, Tevo Tarantula, Tevo Tornado) is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by FreakErn.
- Who made this model?
- Designed by FreakErn, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Raspberry
