Dot/Stip Center Tool
Source: Thingiverse by rvanpuffelen
The Dot/Stip Center Tool is a free printable 3D model from Thingiverse by rvanpuffelen. This is a tool to help place/paint a dot in the exact center of a circular or square object (dish/saucer, approx. You can download the STL file from the original listing below and print it at home.
About this model
This is a tool to help place/paint a dot in the exact center of a circular or square object (dish/saucer, approx. 5 - 19cm). It was designed to help with the hobby of 'ceramics dotting' where it is important to start from the exact center of the object. Centering is done by rotating the cross (clockwise=smaller), the studs will simultaneously slide in/outwards keeping the object in the center. After printing the tool needs some tweaking. Holes are under-sized, use 2.6mm drill and 3x8mm self-tapping countersunk screws (Farnell: 2474970). For mounting the tripod I used M3 set-screws to fit the holes (3mm) of the 'Guide-disk', leave them sticking out about 3mm, this way the tripod can easily be removed. You can also opt to screw the tripod from the bottom (countersink the holes) fixating the …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Dot/Stip Center Tool is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by rvanpuffelen.
- Who made this model?
- Designed by rvanpuffelen, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
