Parametric Propeller Generator V2
Source: Thingiverse by maartenvanschagen
The Parametric Propeller Generator V2 is a free printable 3D model from Thingiverse by maartenvanschagen. Introduction This is a heavily modified fork of BouncyMonkeys 'Parametric Multi-Blade Propellor Generator'. You can download the STL file from the original listing below and print it at home.
About this model
Introduction This is a heavily modified fork of BouncyMonkeys 'Parametric Multi-Blade Propellor Generator'. It was created by Niels Odijk and Maarten van Schagen for a research project because we needed even more parameters. Printing These propellers can be quite difficult to print because of how thin they are. So make sure the blades are strong enough by setting the infill high. And don't forget to use a low layer height to keep the surface as smooth as possible. It is also recommended to sand the blades with very fine-grit sandpaper for the best performance. They should look a lot smoother than the ones in the picture (better pictures should be included in the future). The trailing edge of the blades may be truncated by your slicer because it is to thin to print. Parameters Customization…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Parametric Propeller Generator V2 is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by maartenvanschagen.
- Who made this model?
- Designed by maartenvanschagen, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Parametric
