Working Stargate Mk2
Source: Thingiverse by Glitch
The Working Stargate Mk2 is a free printable 3D model from Thingiverse by Glitch. Estimated print time is 112 hours. You can download the STL file from the original listing below and print it at home.
About this model
Estimated print time is 112 hours. There are 117 parts. This stargate model contains additional pieces to move the top chevron as part of the dialling sequence. Note: The model is slightly larger than the Working Stargate Mk1. Therefore the SGC base on this model will not hold the Mk1 gate firm. Please use the SGC Ramp for Working Stargate Mk1 Due to the additional parts for the moving chevron. The space for wires and LED's is much less. I have used surface mount LED's in the model. Two stepper motors are required for the model. Since the two motors face each other, I have used mounting brackets. If you intend to use a different size motor, you only need to customize the 'stepper_mount_x2.stl' file and not the base. Besides the Arduino and Adafruit Motor Shield, there is also an optional b…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Working Stargate Mk2 is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Glitch.
- Who made this model?
- Designed by Glitch, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Working
