Rope pulley katrol
Source: MyMiniFactory by arnoud van der wal
The Rope pulley katrol is a free printable 3D model from MyMiniFactory by arnoud van der wal. Rope pulley The pulley diameter is 31 mm with a 6 mm groove. You can download the STL file from the original listing below and print it at home.
About this model
Rope pulley The pulley diameter is 31 mm with a 6 mm groove. It uses 2 bearings for a smooth operation. The rope on the picture is 5 mm and runs very nice through it.It is possible that a bit of sanding is needed to make the bearing fit in the pulley. Parts to print: 2 sides 1 ring 1 pulley I printed them with (transparent) ABS 0.3 mm at 90% fill. Will also work with PLA or other plastics.No support is needed. The pulley wheel has a designed in support that you need to break out. Other bits needed: 2x M4x25 (shown on photo. They just fit without washers) or M4x30 (better) bolts 2x M4 lock nuts 4x M4 washers (optional) 2x bearing 624ZZ 4x13x5
Frequently asked questions
- Is this 3D model free to download?
- Yes. Rope pulley katrol is free to download from MyMiniFactory. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MyMiniFactory, not by Thinger. We link you directly to the original listing by arnoud van der wal.
- Who made this model?
- Designed by arnoud van der wal, published on MyMiniFactory. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in outdoortoolsrope
