Logitech LOGI c270 / c505 webcam cover
Source: Thingiverse by mklimmert
The Logitech LOGI c270 / c505 webcam cover is a free printable 3D model from Thingiverse by mklimmert. Logitech webcam cover for C505 ( probably also for C270 ). You can download the STL file from the original listing below and print it at home.
About this model
Logitech webcam cover for C505 ( probably also for C270 ). Cover consists of 3 parts. Glue is not needed, but can be used if you like. The cover covers the lens and the mic, but not the LED so when the cover is closed you still can see if the webcam is turned on or off. The origal front plate need to be removed to mount the webcam cover. If the parts are difficult to assemble, it will most ikely be due to the material shrinkage. I have adjusted the dimensions of the print compared to the actual measurements because I kept a shrinkage over the length of 0.4 to 0.5 mm. It now fit perfectly using the print settings mentioned below. My printer settings: Material: Standard PLA black Printing temperature: 200 Build Plate temperature: 40 Build Plate Adhesion Type: Brim Infill Density: 20% Fan Spe…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Logitech LOGI c270 / c505 webcam cover is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by mklimmert.
- Who made this model?
- Designed by mklimmert, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Logitech
