Extended Leg for Sagework Magnetic Guitar Support
Source: Thingiverse by jackrenter
The Extended Leg for Sagework Magnetic Guitar Support is a free printable 3D model from Thingiverse by jackrenter. Guitar support wasn't long enough for comfortable playing. You can download the STL file from the original listing below and print it at home.
About this model
Guitar support wasn't long enough for comfortable playing. So I remade it longer with more adjustment. 2 screws bolt the end piece onto the support, so threads are required. Tried threading it, but its too small (#4-40 screws) So instead we have spots for (2) #4-40 hex nuts. (designed for 2.30mm thick nuts, 6.25mm across the hex). So you'll need 2 layer pauses to stop the print so you can place the nuts. Pauses at layer 8.4/8.6mm and 17.4/17.6mm. Also, you'll have to suppress/block the supports where the Hex nut goes. Should be printed in orientation shown. Bridge layer walls were shifted to account for the droop onto the supports. Because of the hex nuts, the model is actually solid above the nuts, so they are covered properly. Will need to drill out this material. The size we ended up us…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Extended Leg for Sagework Magnetic Guitar Support is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by jackrenter.
- Who made this model?
- Designed by jackrenter, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Extended
