LSI 9300-16i Dual Ducted 40mm Fan Shroud
Source: Thingiverse by Talgomine
The LSI 9300-16i Dual Ducted 40mm Fan Shroud is a free printable 3D model from Thingiverse by Talgomine. Ducted Fan Shroud for LSI 9300-16i HBA card to fit 2x 40mm fans. You can download the STL file from the original listing below and print it at home.
About this model
Ducted Fan Shroud for LSI 9300-16i HBA card to fit 2x 40mm fans. I wanted a better solution for cooling my card than just having a single 40mm on the heatsink with nylon screws into the fin gaps. I sketched up a shroud that clips over the heatsink and is fed by two 40mm fans that are mounted far enough back so as to avoid completely blocking the next PCIe slot. The fan mounting holes can be drilled out if you need larger than 2mm. I have a Silverstone RM43-320 rackmount case with the front fans swapped to Noctua NF-F12 Industrial PPC 2000rpm fans set at 85% and the 2x40mm Noctua fans on the HBA are also set to 85%. The HBA sits at 50-55C
Frequently asked questions
- Is this 3D model free to download?
- Yes. LSI 9300-16i Dual Ducted 40mm Fan Shroud is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Talgomine.
- Who made this model?
- Designed by Talgomine, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in LSI
