Type 2 IEC 62196 Mennekes Handle for Male Inlay
Source: Thingiverse by pfeffer
The Type 2 IEC 62196 Mennekes Handle for Male Inlay is a free printable 3D model from Thingiverse by pfeffer. English Handle for the type 2 IEC 62196 connector (also called "Mennekes Connector") used for charging electric cars. You can download the STL file from the original listing below and print it at home.
About this model
English Handle for the type 2 IEC 62196 connector (also called "Mennekes Connector") used for charging electric cars. I made this for the according inlay All things you need to print for the handle are collected in two files: * print_all_hard.stl and * print_all_soft.stl. The soft things (print using TPU) are used for the cable entry protection and as gasget. Everything else should be printet in a normal plastic. The original Mennekes connector uses PA6 (nylon). Everything is printed without support with 0.1mm layer height. Furthermore you need to print the inlay referenced above. You need 6 screws: * 2 for the cable strain relief (2,5mm, 15mm long) * 4 for screwing the halfes together (2,5mm, 18mm long) In case you need to (re-) print a specific part: files cantaining each part separately…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Type 2 IEC 62196 Mennekes Handle for Male Inlay is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by pfeffer.
- Who made this model?
- Designed by pfeffer, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Type
