MakerBot Digitizer LaserCat - Layer thickness tests
Source: Thingiverse by CreativeTools
The MakerBot Digitizer LaserCat - Layer thickness tests is a free printable 3D model from Thingiverse by CreativeTools. The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. You can download the STL file from the original listing below and print it at home.
About this model
The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. The cat was scaled down to 50 mm in height and then 3D printed at the following layer heights: - 0.40 mm (400 microns) - 0.30 mm (300 microns) - 0.20 mm (200 microns) - 0.10 mm (100 microns) - Average width of a strand of human hair - 0.05 mm (50 microns) - 0.02 mm (20 microns) All six cats where 3D printed on a MakerBot Replicator 2 with TRUE BLUE PLA plastic at 230 degrees C. All layers where 3D printed with MakerWare's standard values as follows: (400 microns) - 15% infill - perimeters 2 - speed 90 mm/s (300 microns) - 15% infill - perimeters 2 - speed 90 mm/s (200 microns) - 15% infill - perimeters 2 - speed 90 mm/s (100 microns) - 15% infill - perimeters 2 - speed 90 mm/s (50 micron…
Frequently asked questions
- Is this 3D model free to download?
- Yes. MakerBot Digitizer LaserCat - Layer thickness tests is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by CreativeTools.
- Who made this model?
- Designed by CreativeTools, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in 3D print test
More from CreativeTools
