One-Way Valve / Check Valve
Source: Thingiverse by Mirkoengineer
The One-Way Valve / Check Valve is a free printable 3D model from Thingiverse by Mirkoengineer. This is a One way valve deisgned to work with vinal tubing with an external diameter of 11 mm and an internal diameter of 6.5 mm, the sphere has a diameter of 7.1 mm. You can download the STL file from the original listing below and print it at home.
About this model
This is a One way valve deisgned to work with vinal tubing with an external diameter of 11 mm and an internal diameter of 6.5 mm, the sphere has a diameter of 7.1 mm. ISTRUCTIONS: - The Body of the valve is perfecly straight forward but be carefull because inside there are 45° overhangs and you have to have a printer which is capeable to deal with that. - The sphere has to be printed to the maximum resolution of your printer!! it is really critical, in my case I printed it with 0.05 mm layer height. Import 2 sphere in your slicer and then lower them into the build-plate by the radius (z offset = - radius / -3,55 mm) so that you end up printing to semi-sphere that you can glue together afterward with some CA glue. If you need to use this with a tube with a diffrent diameter, just write me i…
Frequently asked questions
- Is this 3D model free to download?
- Yes. One-Way Valve / Check Valve is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Mirkoengineer.
- Who made this model?
- Designed by Mirkoengineer, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in One-Way
