RC4WD 2 speed gearbox short transfer case upgrade
Source: Thingiverse by Bedzplane
The RC4WD 2 speed gearbox short transfer case upgrade is a free printable 3D model from Thingiverse by Bedzplane. RC4WD 2 speed gearbox transfer case modification: This is to allows for bolting on the transfer case directly to the gearbox without the need for a drive shaft. You can download the STL file from the original listing below and print it at home.
About this model
RC4WD 2 speed gearbox transfer case modification: This is to allows for bolting on the transfer case directly to the gearbox without the need for a drive shaft. It makes the gearbox/TC assembly a lot more compact and therefore easier to fit on short wheel base vehicle. It also looks more like an actual 4wd gearbox. What you need: a 15 teeth sprocket gear 32p and 5mm bore. commonly used on RC car ( such as this item: 6 M2.5x8mm machine screws to secure the transfer case flange to the gearbox housing 4 M2x4mm plastic screw to secure the bearing cover to the transfer case flange Procedure: Prepare printed parts by redrilling all holes to the correct diameter before to assemble, transfer case takes 2mm bolts while the gearbox takes M2.5mm bolts. drill these holes at 2mm and perform M2.5mm tap.…
Frequently asked questions
- Is this 3D model free to download?
- Yes. RC4WD 2 speed gearbox short transfer case upgrade is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Bedzplane.
- Who made this model?
- Designed by Bedzplane, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in RC4WD
