Rotating Dice
Source: Thingiverse by gustavorezende
The Rotating Dice is a free printable 3D model from Thingiverse by gustavorezende. This was totally based on these nice and well machined rotating dice: To make one, you'll need: - 4 small bearings (3x10x4 mm) like these ones: - 14 little magnet spheres (3mm). You can download the STL file from the original listing below and print it at home.
About this model
This was totally based on these nice and well machined rotating dice: To make one, you'll need: - 4 small bearings (3x10x4 mm) like these ones: - 14 little magnet spheres (3mm): - a 45mm length metal rod, with 3mm in diameter. I used one with 2.7mm from a clothes hanger. By rule, the tighter, the better. I think 2.8mm will work well. - two 16mm length screws, 3mm diameter (M3). ----------------------------------------------------------- - Print the parts with 0.1 or 0.2 layer height. I printed the parts with 20% infill, 3 shells. The dice discs were printed with 50% to give them some weight and moment of inertia. I've printed the supports with the drawings facing down. Try reducing the perimeters to one in the first layers. I found that the surface comes out more visually interesting. Just…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Rotating Dice is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by gustavorezende.
- Who made this model?
- Designed by gustavorezende, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Rotating
