BIQU BX upgrades by CippyO
Source: Thingiverse by CippyO
The BIQU BX upgrades by CippyO is a free printable 3D model from Thingiverse by CippyO. I have made a bunch of printable mods for the BX. You can download the STL file from the original listing below and print it at home.
About this model
I have made a bunch of printable mods for the BX. Every part is rotated to the best printing orientation. Tiltable, rotatable screen mount No support needed. Remove the sacrificial layer with a lexan body reamer/drill, or a step drill. You will need 4 m3 screws for the hinges: 2 m3 by 20mm and 2 m3 by 35-40mm, and at least one m3 washer per screw. You might have to raise the printer in order to be able to set the screen completely vertical. There are printable legs that can raise the printer with about 1-2 cm. It was necessary to lower the screen to avoid collision with the X gantry, especially when printing from usb. You will need 2 spacers(3x6x2mm) in order to provide a leveled mount for the screen mount. Also you'll need 4 m2.5 by 6mm screw to mount the screen. I have not tested the Ras…
Frequently asked questions
- Is this 3D model free to download?
- Yes. BIQU BX upgrades by CippyO is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by CippyO.
- Who made this model?
- Designed by CippyO, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in BIQU
