Right Angle Edge Guide for Festool ETS EC125/3 EQ
Source: Thingiverse by supergimp
The Right Angle Edge Guide for Festool ETS EC125/3 EQ is a free printable 3D model from Thingiverse by supergimp. Since Festool doesn't make a right angle edge sander for this model, and inspired by the design here: I decided to design and print my own. You can download the STL file from the original listing below and print it at home.
About this model
Since Festool doesn't make a right angle edge sander for this model, and inspired by the design here: I decided to design and print my own. I had to remodel everything, and in the end I only borrowed the design of the base plate from that design but changed it a bit and designed my own mounting system. The print requires inserting several M4 nuts mid-print. I do this in PrusaSlicer by defining a layer pause once the cavities for the nuts are complete but before they are covered over by the next layer. The following parts have embedded hardware (assuming 0.2mm layer height): Arm - Print vertically and pause at layer 56 to insert four (4) M4 nuts. Ref Surface - Print flat on build surface and pause at layer 216 to insert four (4) M4 nuts. Rounded Knob (2) - Similarly, pause on layer 29 to in…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Right Angle Edge Guide for Festool ETS EC125/3 EQ is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by supergimp.
- Who made this model?
- Designed by supergimp, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in festool
