House Numbers
Source: Thingiverse by Glompie
The House Numbers is a free printable 3D model from Thingiverse by Glompie. I made the numbers 0 till 9 so you can make allmost every house number you can think of. You can download the STL file from the original listing below and print it at home.
About this model
I made the numbers 0 till 9 so you can make allmost every house number you can think of. Print the letters or numbers you need in a material that withstands the weather. I guess anything but PLA... (or sand and spray paint your PLA). Layer height 0,25mm and for the pins 0,15. Make 2 pins per number. (or 3 for a letter) Number height is 107mm - 15mm thick - font is Arial Bold You have to use a mini hacksaw to make a kerf of about 5mm deep in the little tubes on the numbers. One kerf is enough. I could have designed it but I think sawing works better than printing in this case. This way the pin fits exactly in the tube. Push or pull straight in or out otherwise you'll probably break it. You can use screws with sunken head of 4 x 39mm. (head is 7,8mm diameter) Assemble the screws for silhouet…
Frequently asked questions
- Is this 3D model free to download?
- Yes. House Numbers is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Glompie.
- Who made this model?
- Designed by Glompie, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in House
