Monitor Stand
Source: Thingiverse by SooperKewlDesigns
The Monitor Stand is a free printable 3D model from Thingiverse by SooperKewlDesigns. A four part monitor stand meant to hold a 24 in monitor. You can download the STL file from the original listing below and print it at home.
About this model
A four part monitor stand meant to hold a 24 in monitor. Monitor Tilt is adjustable. If anyone wants a different height, there is a model attached with different height positions for the Vesa Mount. You need 350mm of print height, and a 300mm^ bed to print the base in one piece. If you use this model please consider donating. This base was printed with a 0.8mm nozzle, two outer layers, and 0.25mm layer height. Infill was 50% with a triangular pattern. The bolt and grapel were printed with a 0.4mm nozzle, five outer layers, and 0.2mm layer height. Infill was 70% with a triangular pattern. The Vesa mount was printed with a 0.4mm nozzle, 3 outer layers, and 0.2mm layer height. Infill was 50% with a triangular pattern. If you intend to use this part make sure you are using high quality filamen…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Monitor Stand is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by SooperKewlDesigns.
- Who made this model?
- Designed by SooperKewlDesigns, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Monitor
