5.25" Optical DVD Drive Enclosure
Source: Thingiverse by OspreyGozo
The 5.25" Optical DVD Drive Enclosure is a free printable 3D model from Thingiverse by OspreyGozo. Breathe new life into your old internal optical DVD drive by building it an enclosure and turn it into a USB external drive. You can download the STL file from the original listing below and print it at home.
About this model
Breathe new life into your old internal optical DVD drive by building it an enclosure and turn it into a USB external drive. You can use an IDE to USB converter like this one: And a power supply like this one: No supports needed. Might be a good idea to print using a 0.8 nozzle to speed up the print. Require six M3x10 countersunk screws to fix the drive and back plate in place. Update: 24-Apr-2020 Added an enclosure_test.stl part that only prints the first 10mm of the enclosure. This allows you to test the fit before printing the whole enclosure. Sometimes it is too tight or too loose and you might need to compensate by scaling slightly or applying a positive or negative Horizontal Expansion setting (Cura).
Frequently asked questions
- Is this 3D model free to download?
- Yes. 5.25" Optical DVD Drive Enclosure is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by OspreyGozo.
- Who made this model?
- Designed by OspreyGozo, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in 5.25"
