Front & Rear 1.9 Rc Dually Rim
Source: Thingiverse by Ict890
The Front & Rear 1.9 Rc Dually Rim is a free printable 3D model from Thingiverse by Ict890. All Fixed and good to be printed, for your RC needs. You can download the STL file from the original listing below and print it at home.
About this model
All Fixed and good to be printed, for your RC needs. For my RC truck. 1.9in diameter for 1/10 scale RC tires. 12mm hex for 1/10 scale RC cars. For full setup print 2 of everything and 2 or 4 extra Rear_Dually_Adapters depending how big you want your tires spacing. You will need 24 4-40 or m3 nuts and 12 4-40 or m3 bolts with the length of 1 1/2in and 12 4-40 or m3 bolts with the length of 1/2in. !!PRINT IN COLOR YOU WANT THEM TO BE!! (they can be kinda painted but requires masking) The prototype has been printed and the files have some slight adjustments to them so if you previously downloaded it you will have to re-download it. Comment any problems you have with them. Version 2 Available Here:
Frequently asked questions
- Is this 3D model free to download?
- Yes. Front & Rear 1.9 Rc Dually Rim is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Ict890.
- Who made this model?
- Designed by Ict890, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Front
