Phone Tablet Stand - No support needed
Source: Thingiverse by Larsen514
The Phone Tablet Stand - No support needed is a free printable 3D model from Thingiverse by Larsen514. No support needed I recommend 100% infill. You can download the STL file from the original listing below and print it at home.
About this model
No support needed I recommend 100% infill. Makes it feel better when you place your phone on it. Also, if you intend to use this for the iPad, 100% infill will make it sturdier. Better yet, replace infill by adding more perimeters; easier on the printer (shakes less), and prints faster. At 80mm/s interior perimeter speed and 45mm/s outer perimeter speed, it took me 4hrs to print. If you are not certain about your ability to print open circles/overhangs, simply cut the part in your slicer to the section with overhangs and do some tests with nozzle temp, print speed and fan speed. Better to waste 10g of filament on a test than waste 3 hours on a fail. The model in the photos is actually smaller than the files provided. It was a prototype. I provide two versions. Shorter - If you have a cable…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Phone Tablet Stand - No support needed is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Larsen514.
- Who made this model?
- Designed by Larsen514, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Phone
/https://fbi.cults3d.com/uploaders/13465478/illustration-file/04ca2a83-41c4-4199-a638-fce41cdeaf2e/1.png)
