Spitfire Propeller 1:4 scaled model
Source: MyMiniFactory by Alex Ng
The Spitfire Propeller 1:4 scaled model is a free printable 3D model from MyMiniFactory by Alex Ng. Spitfire Propeller designed with Autocad 3D 1:4 model Root hub to fit into spinner: 3.4cm diameter circle. You can download the STL file from the original listing below and print it at home.
About this model
Spitfire Propeller designed with Autocad 3D 1:4 model Root hub to fit into spinner: 3.4cm diameter circle. From Root to tip = 375 mm or 14.76 inches Comes in 5 parts, glued together using locttite 406 superglue for plastics Estimated 1.75mm filament needed for 1 blade (1:4 scale model) = Between 15meters to 25meters (49ft to 82ft) Print with PLA to avoid wrapping and to produce relatively sharp trailing edge of the blade. You can scale accordingly. Eg, a 1:8 model just divide full scale by 2. Recommended print settings (tested as per picture) -Vertical wall: 2 shells Infill honeycomb/rectilinear 5%-Bottom and Top solid layers: 3-Printspeed keep it generally 50mm/s throughout for smooth and sharp print especially at the trailing edge of the blade
Frequently asked questions
- Is this 3D model free to download?
- Yes. Spitfire Propeller 1:4 scaled model is free to download from MyMiniFactory. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MyMiniFactory, not by Thinger. We link you directly to the original listing by Alex Ng.
- Who made this model?
- Designed by Alex Ng, published on MyMiniFactory. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
