Creality Stock Hotend Mount & Part cooling with BLT & EZABL
Source: Thingiverse by Hangtight
The Creality Stock Hotend Mount & Part cooling with BLT & EZABL is a free printable 3D model from Thingiverse by Hangtight. This is a hotend and part cooling solution for the stock Creality or MicroSwiss hotend. You can download the STL file from the original listing below and print it at home.
About this model
This is a hotend and part cooling solution for the stock Creality or MicroSwiss hotend. The duct design is based on a proven part cooling solution and makes effective use of a 5015 blower. The hotend is cooled by the stock 40mm fan. There is no need to cut threads as recesses are included that will accept M3 nuts providing a threaded anchor for M3 bolts, two of which are required to secure the hotend duct to the X carriage. Two more secure the BLTouch bracket. A single M3 bolt clamps the height adjustable part cooling duct in place, and one secures the 5015 blower to the duct. You'll need 3X M3x15mm to secure the hotend fan. Small self tapping screws will work for this too. To secure the shroud to the carriage 2X M3x10mm socket cap head screws. Ton secure the fan duct to the shroud, 1X M3x…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Creality Stock Hotend Mount & Part cooling with BLT & EZABL is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Hangtight.
- Who made this model?
- Designed by Hangtight, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Creality
