Popper Licious - Lure - Fishing Lure
Source: Thingiverse by arovillard
The Popper Licious - Lure - Fishing Lure is a free printable 3D model from Thingiverse by arovillard. Popper Licious Preferred scale: 150% with 3 walls and 3 top and bottom layers at 0.3 and 10-15% Grid infill at 45 and - 45 degrees, this has given me the best results as there. You can download the STL file from the original listing below and print it at home.
About this model
Popper Licious Preferred scale: 150% with 3 walls and 3 top and bottom layers at 0.3 and 10-15% Grid infill at 45 and - 45 degrees, this has given me the best results as there will be an X through the middle of the lure and the chamber will have a much smaller bridging to do. The popper, when resting in the water, has to sit at an angle (see picture for reference) I had to play around with different hook sizes until I was able to find the right combination. One thing to keep in mind is, if you print it at 100% size, it will be very dense and not float much (even sink once the hooks are on) so consider lightening it up when printing smaller versions than 130%. If you intend to use a bb for rattling, don't forget to pause the print to add it. The 3 holes are designed to not come out as holes…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Popper Licious - Lure - Fishing Lure is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by arovillard.
- Who made this model?
- Designed by arovillard, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in fishig-lure
