/https://fbi.cults3d.com/uploaders/20344408/illustration-file/007b847a-1f4f-4585-a963-593125e8415f/20260401_182435.jpg)
Acura RSX Group 35 Battery Modification | Tray Spacer
Source: Cults3D by T3KMaker
The Acura RSX Group 35 Battery Modification | Tray Spacer is a free printable 3D model from Cults3D by T3KMaker. This is a simple battery tray spacer with included installation instructions. You can download the STL file from the original listing below and print it at home.
About this model
This is a simple battery tray spacer with included installation instructions. The spacer is designed so you don't need to use washers on the battery tie down. You will need a M8x1.25 12mm low profile flat topped cap screw. (the head is 3mm tall) The spacer is also 3mm tall I had an impossible time trying to print it out of Polycarbonate, but if your printer is better I recommend Nylon or PC. However the minimum you should use is ABS or ASA plastic like I did. (mine is printed in black gizmodorks ASA) Should also fit the JDM DC5 Honda Integra.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Acura RSX Group 35 Battery Modification | Tray Spacer is free to download from Cults3D. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Cults3D, not by Thinger. We link you directly to the original listing by T3KMaker.
- Who made this model?
- Designed by T3KMaker, published on Cults3D. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
