Simple CR10 Brace Mod
Source: Thingiverse by 3DPengn
The Simple CR10 Brace Mod is a free printable 3D model from Thingiverse by 3DPengn. Description: This mod is a minimal design for adding braces to the CR10. You can download the STL file from the original listing below and print it at home.
About this model
Description: This mod is a minimal design for adding braces to the CR10. The brackets holding the brace in place slide into the vslot railing and hold tight enough not to require any additional screws, aside from the threaded post its self. You will need to print two of each type of bracket. You will then need to add one of each bracket type to each threaded post and secure them in place with a nylon locking nut on either side of the bracket. There will be some adjusting needed to get the bracket pieces in just the right position to fit on the printer. The vslot rail by somaraok, listed under the remix, was utilized in this print to help get the shape for the brackets to slide into the vslot railing. Materials: 1/4 inch threaded post 24 inches long - 2 1/4 inch nylon lock nut - 8 Print Det…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Simple CR10 Brace Mod is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by 3DPengn.
- Who made this model?
- Designed by 3DPengn, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Simple
