Circular Knitting Machine (CSM)
Source: Thingiverse by RKStar42
The Circular Knitting Machine (CSM) is a free printable 3D model from Thingiverse by RKStar42. This OpenSCAD file describes my version of a circular knitting machine. You can download the STL file from the original listing below and print it at home.
About this model
This OpenSCAD file describes my version of a circular knitting machine. This is an original design, but some details and ideas were obtained from various sources . User RoundandRound ( very gracefully produced an assembly guide which can be found in the files section. Design criteria: - Bi-directional (for heel and toe knitting); - Minimal moving parts; - Low friction; - Minimal contact of yarn with printed parts (no snagging); - Minimal sanding; - Low cost: budget under 50 Euro The machine is driven by side-by-side pullies with a 2GT timing belt to reduce friction. Also the machine runs on three ball-bearings, using 4.5mm steel BB's as balls. There are 2 push-up cams, leaving the needles normally in the up position. They can be pushed down to do maintenance; eg. to pick up dropped stitche…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Circular Knitting Machine (CSM) is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by RKStar42.
- Who made this model?
- Designed by RKStar42, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Circular
/https://fbi.cults3d.com/uploaders/23064682/illustration-file/1bb18101-a4e4-47ef-851b-e2d946cef40f/grok-image-a3f6decb-0d8d-4fe0-91ba-4c6007584ff5.jpg)
