Tevo Tarantula Filament Runout Sensor Enclosure
Source: Thingiverse by stylesuxx
The Tevo Tarantula Filament Runout Sensor Enclosure is a free printable 3D model from Thingiverse by stylesuxx. I designed this to be used with the spare sensor that comes with the Tevo Tarantula kit. You can download the STL file from the original listing below and print it at home.
About this model
I designed this to be used with the spare sensor that comes with the Tevo Tarantula kit. You can either use small screws (M2) to attach the switch, or as I do here, simply use 1.75mm filament to attach the switch to the enclosure. Screw the enclosure together with 3 M3 x 12mm screws and nuts. I used some short pieces of PTFE tubing on the ends of the enclosure, but this is by no means necessary. Print the filament_runout_enclosure.stl twice. After printing you may want to sand the pieces down, so the fit together nice and flush. I used the Z+ Port, therefore you need to set FIL_RUNOUT_PIN in pins_RAMPS.h to 19: #define FIL_RUNOUT_PIN 19 In Configuration.h search for the FILAMENT_RUNOUT_SENSOR define and comment it out. If you want to use the default pinout, also invert the logic of the sen…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Tevo Tarantula Filament Runout Sensor Enclosure is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by stylesuxx.
- Who made this model?
- Designed by stylesuxx, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Tevo
