2 inch dredge/8 inch sluice box for gold mining
Source: MakerWorld by Jingjar-Ninjar
The 2 inch dredge/8 inch sluice box for gold mining is a free printable 3D model from MakerWorld by Jingjar-Ninjar. Note: If it shows as too large for your print volume in the slicer, follow this guide: glue required - brass inserts, bolts, and wing nuts onlyDurable, strong printsKnockdown. You can download the STL file from the original listing below and print it at home.
About this model
Note: If it shows as too large for your print volume in the slicer, follow this guide: glue required - brass inserts, bolts, and wing nuts onlyDurable, strong printsKnockdown unit can be moved forward to allow for shoveling/inspection of the first sectionAdjustable legs - quick-releaseWorks well with Utmost Outdoors nozzle and bilge upgradeThis is intended to be used with a suction nozzle system (I use the one by Utmost Outdoors) and a 4700 GPH bilge pump. It can be run as a dredge by attaching the outlet of the suction nozzle to the header, or as a powered sluice by attaching a 3700 or 4700 GPH bilge pump directly to the header.Instructions are for dredge setup. Sealing is NOT required. If you wish to seal seams, you can use CA glue (permanent) or place Gorilla tape over seams. I have had…
Frequently asked questions
- Is this 3D model free to download?
- Yes. 2 inch dredge/8 inch sluice box for gold mining is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Jingjar-Ninjar.
- Who made this model?
- Designed by Jingjar-Ninjar, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in gold
