Tevo Tarantula Electronics Enclosure .case
Source: Thingiverse by Aynareth
The Tevo Tarantula Electronics Enclosure .case is a free printable 3D model from Thingiverse by Aynareth. This is case. You can download the STL file from the original listing below and print it at home.
About this model
This is case. It is made for the MKS 1.4 / 1.5 Board and 2 Mosfet for Printers like the Tevo Tarantula. It can be printed on the small Buildplate (200x200mm), so everyone can print and use it. For the cooling fan there are three Options ranging from 40 to 80mm. I know the Design can be al little cramped with all the Cables, but everything fits! The Design is well tested and working. If you have any Problems getting all your cables through the Holes, you can cut out the middle parts, to get a bigger hole. With the Mounting Holes on the Back, and the Side, you should have enough Options to mount your case to the Frame. There are Offset Brackets included as well. What you need: 12x Motherboard Screws 9x5mm (4 for MKS Board and Mosfets each) 4x M4x6 for the Cover 4x Screws for the Fan, dependi…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Tevo Tarantula Electronics Enclosure .case is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Aynareth.
- Who made this model?
- Designed by Aynareth, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Tevo
