Tape Measure Spool - Customizable and Print in Place
Source: Thingiverse by aprotim
The Tape Measure Spool - Customizable and Print in Place is a free printable 3D model from Thingiverse by aprotim. A simple, print-in-place winder for a cloth measuring tape. You can download the STL file from the original listing below and print it at home.
About this model
A simple, print-in-place winder for a cloth measuring tape. This can be customized for your own tape by clicking "customize" on the Thingiverse page. The provided STL works for a 315cm measuring tape (including branded bit at the end) that is 2cm wide and 0.4mm thick. If you want to measure your tape for customization: - Length - c'mon. You've got this one. - Width - cross the tape across itself to measure its own width. - Thickness - wind it 10 times loosely around your hand, pinch the middle gently, measure the height of the pinched section, and divide by 20. - Tab thickness - if you don't have calipers, the metal tab is probably a little less than 3 times as thick as the tape. Usage note: This spool will probably get stuck if you attempt to spin the handle like a crank (too much lateral…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Tape Measure Spool - Customizable and Print in Place is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by aprotim.
- Who made this model?
- Designed by aprotim, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Tape
More from aprotim
