Pocket hole jig
Source: Thingiverse by infoengineer
The Pocket hole jig is a free printable 3D model from Thingiverse by infoengineer. This is a jig for drilling holes at a 17 degrees angle to get a quick and good joint of wooden boards. You can download the STL file from the original listing below and print it at home.
About this model
This is a jig for drilling holes at a 17 degrees angle to get a quick and good joint of wooden boards. !Inserts The insert with guide holes was specially designed in OpenSCAD, so you can adjust the hole diameters the way to fit your drill bit (on pic. A) and then generate your own STL file. I suggest you make the guide holes stronger with metal (it may be copper, aluminum, or alloys but iron or steel, no doubt, better) bushings, using tubes of an appropriate diameter (as shown on pic. B). The device is also compatible with a jig (see on pic. C) produced by Chinese manufacturers. You'll be able to easily find and purchase it on Amazon or AliExpress for example. To assemble it, you need an M6 x 90 mm bolt, an M6 x 40 mm bolt, an M6 x 18 mm coupling nut, three M6 nuts, an M6 nylon-insert lock…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Pocket hole jig is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by infoengineer.
- Who made this model?
- Designed by infoengineer, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in customized
